Cost guide

Chimney Repair Cost in London: Repointing, Flashing and Stack Prices

Re-bedding pots or fitting a cap costs £350–£800 in London. A partial rebuild of a shared party-wall stack can reach £3,500.

⏱ 5 min readUpdated 27 October 2026Covers: Chimney Repairs
Illustration of a tall brick chimney stack with six pots on a terrace roof ridge, part of the brickwork shown repointed in lighter mortar

London's terraces carry a lot of chimneys, usually in pairs or groups of four or six along the party wall, and most have had little attention since the house was built. Chimney repairs typically cost between £350 and £3,500 in the capital. The low end buys new flaunching or a cap. The high end is a partial rebuild or a tall shared stack that needs more scaffold.

What you can expect to pay

Typical chimney repair costs in London, supplied and fitted

Job sizeTypical cost
Re-bed pots, renew flaunching or fit caps, using existing access£350–£800
Repoint a stack and renew its lead flashings, with scaffold£800–£1,800
Partial or full rebuild of a multi-flue party-wall stack£1,800–£3,500

These are guide figures. Scaffold or a tower is often the largest single cost on a small job, so having several repairs done at once is cheaper than coming back for each one.

What changes the price

  • Height and access. A rear stack on a two-storey back addition is easy to reach. A tall front stack on a three-storey house may need full scaffold.
  • Size of the stack. More pots and more faces to repoint add labour.
  • Condition. Brickwork that is crumbling or leaning needs rebuilding, not repointing.
  • Flashings. Lead flashings round the base of a stack are expensive materials, and a failed flashing is a common source of ceiling stains below.
  • Flaunching. The mortar bed holding the pots, if cracked, lets water into the flue and down the stack.
  • Shared walls. On a terrace the stack belongs to two houses, and the work can need a neighbour's agreement. See below.

Shared chimney stacks

Most terraced houses share a chimney stack with the house next door, either as one stack sitting astride the party wall or as a pair. Repairs to a shared stack can affect the neighbour's roof and flue, and in many cases the Party Wall etc. Act 1996 applies, which means giving the neighbour written notice before work starts. Tell the roofer at the quote stage that the stack is shared, so they can allow for access from both sides and talk to the neighbour if needed.

Unused flues

If a flue is no longer used it should be capped but kept ventilated, rather than sealed solid, to stop damp building up in the chimney breast. Ask what the roofer proposes before agreeing to a cap.

Signs a stack needs attention

  • Crumbling or missing mortar, or bricks that have slipped
  • A lean visible from the street
  • Loose or cracked pots
  • Stains on the chimney breast or ceilings near the stack
  • Lead flashing that has lifted or split at the roof
  • Loose debris in the grate or fireplace

A stack that looks wrong from the pavement is worth a proper look soon, because a falling brick is a danger to people below. Our roof repairs cost guide covers the wider roof, and the signs your London roof needs work checklist shows what to look for from the ground.

What a fair quote should include

  • The repair method: repointing, re-bedding, partial or full rebuild
  • The mortar, usually lime or a lime-cement mix on older brickwork
  • Flashing and flaunching details and the lead code
  • Scaffold or tower and who pays any licence fees
  • Party wall arrangements where the stack is shared
  • VAT and guarantee

Frequently asked questions

How much does it cost to repoint a chimney in London?

A small repoint on an accessible rear stack might cost around £800 to £1,800 including scaffold. Larger stacks, steeper roofs and those needing scaffold cost more.

Who is responsible for a shared chimney stack?

Usually both neighbours share responsibility, but it depends on the deeds and the layout of the stack. It is sensible to agree the work and any costs in writing before the roofer starts.

Is chimney repointing the same as rebuilding?

No. Repointing replaces worn mortar and keeps the bricks. A rebuild takes the stack down and re-lays it, which is needed when the bricks or structure are failing.

Do I need scaffolding for chimney repairs?

Often, yes. A tower or scaffold is needed to work safely at height, and it can account for a large share of the price on small jobs.

Ready to talk to a chimney repairs specialist?

Get Free Quotes →