London lofts are valuable space, and roof windows are how most of them get daylight. Roof window installation typically costs between £900 and £3,500 in the capital. Swapping a window into an existing opening is the cheap end. A new opening cut into the roof, a conservation-style rooflight or several windows in one loft conversion is the dear end.
What you can expect to pay
Typical roof window installation costs in London, supplied and fitted
| Job size | Typical cost |
|---|---|
| Replace an existing roof window in the same opening | £900–£1,400 |
| New roof window with trimmed rafters, flashing and internal lining | £1,400–£2,500 |
| Conservation rooflight, large or paired units, or flat-roof rooflight | £2,500–£3,500 |
These are guide figures for supply and fitting. They rise with window size, glazing specification and how much internal work, such as plastering and lining the reveal, is included.
What changes the price
- New opening or existing. Cutting through rafters means trimming them with a doubled-up header, and sometimes involves a structural engineer.
- Window type. Centre-pivot, top-hung and conservation-style windows differ in cost. Conservation rooflights sit flush with the slates and usually cost more than standard units.
- Flashing kit. Each window needs a flashing kit matched to the roof covering, slate or tile, and flat-roof rooflights use different upstands.
- Glazing. Triple glazing, laminated or acoustic glass and solar control add to the price, and a pane that opens fully for fire escape purposes matters in a loft conversion.
- Access. Reaching a rear roof from a narrow terrace garden is easier than a front slope onto a street.
- Internal finish. Plastering and decorating the lining may or may not be included.
Permission and regulations
In England a roof window in an ordinary house can often be fitted without planning permission if it does not stick out more than 150mm from the roof plane and does not rise above the highest part of the roof. Windows in a roof slope that forms a side elevation must be obscure-glazed and non-opening unless the opening part is more than 1.7m above the floor. Flats, listed buildings and homes in conservation areas have more controls, including on front slopes, and some boroughs restrict changes with an Article 4 direction. Check with your borough before ordering, and read the Planning Portal's building regulations guidance for work to an existing roof for how Building Regulations apply. Ask the roofer who will deal with building control.
Order the window only once you know a conservation officer, freeholder or neighbour will not object. Rooflights ordered to size cannot normally be returned.
What a fair quote should include
- The window make, model and size, and the glass specification
- The flashing kit and how it suits your roof covering
- Structural work: rafter trimming, a new header, and any engineer's design
- Internal lining, plastering and finishing
- Scaffold or tower, and who pays any licence fee
- VAT, guarantee, and who handles building control
If the loft is going to be a bedroom, tell the roofer so they can check the opening is large enough to count as an escape route. Roof windows also sit on the roof itself, so it helps to check the condition of the slates around them: our signs your London roof needs work checklist is a quick way to do it.
Frequently asked questions
How much does it cost to fit a roof window in London?
A standard window in an existing opening typically costs about £900 to £1,400. A new opening with structural work, or a conservation rooflight, costs more.
Do I need planning permission for a roof window?
Often not for a house, if it stays within the limits for projection and height, but conservation areas, flats and listed buildings have extra rules. Check with your borough.
Can I fit a roof window in a loft conversion?
Usually, subject to the structure and Building Regulations. A loft conversion generally needs building control approval, and the windows form part of that.
How long does a roof window installation take?
A single window in an existing opening can take a day. A new opening, or several windows, usually takes up to two days.
Ready to talk to a roof window installation specialist?
Get Free Quotes →
